|
Static Mixers Our range of static mixers can be manufactured using PP, PVC, FRP, PVDF, PTFE, SS, and MSRL to suit highly corrosive circumstances. Mixing is one of the most essential processes for any chemical process industry. These industries are always aim to achieve better mixing in a very cost effective manner. Static Mixer offered by us is unique because the material itself is moved through its elements as next to blades though material in dynamic mixers. Our mixers can be used to mix different types of paste, slurry, liquid and gases. These are known for its features such as no maintenance problems, exceptionally long life, and continuous operation.
Our static mixers are designed after careful study of various process parameters such as viscosity, density, flow rate, pressure drop and desired COV –coefficient of variation (a measure for degree of mixing), Reynolds’s number, and flow type- laminar or turbulent. It us the most advanced method for mixing. The incessant phase material and the additives phase are mixed and then passed through a number of elements with. The element shifts the mixture radically in and out while enduring to flow in axial track. This action leads division and union of flow of material at each element. Finally, the mixture becomes homogeneous ensuing in excellent mixing.
Features:
- Highly efficient mixing
- Low energy consumption
- No moving parts for maintenance free operation
- No direct motive power required
- No need for tanks in most cases
- Ease of installation
- Minimal space requirement
- Totally enclosed pipe designs
- Optional injectors and sample points
- Available in all sizes
- Available in a wide range of materials
- Custom design
Applications of Static Mixers:
Water and waste wastewater
- Aerating water for fe and mn removal
- Neutralization by addition of caustic
- Dissolving ozone
- Mixing of flocculants such as fecl3
Cosmetics and detergents
- Saponifying greases with caustic soda
- Diluting surfactants
Chemicals
- Mixing miscible/dispersing immiscible reactants
- Neutralization of process streams
- Mixing of gases in front of catalytic reactors combustion
Energy
- Mixing blast furnace and coke oven gas
- Blending fuel gases with air before combustion
Polymers
- Mixing additives, catalysts, into polymers
- Rapid heating of polymers
- Homogenization of temperature and colorants in polymer
Petrochemical
- Chlorination of hydrocarbons
- Pulp and paper
- Mixing bleaching chemicals with pulp
|
